How to change drawer slides to soft close

If you change out your drawer slides to soft close, it can help your drawers work better and seem more modern. Soft close slides allow the drawer to gently shut without slamming. This is perfect for keeping your home silent and furniture safe. If you’re ready to upgrade your drawers, it’s simpler than you think! With a couple of tools and some guidance, you can do it yourself. HVPAL has quality soft close drawer slides that are ideal for this task. Let’s jump right in to how to install them easily and, more importantly, where you can buy them. 

How to Simple Cut and Install Soft Close Drawer Slides for an even better Upgrade

First things first, you need some tools. You will need some sort of screwdriver, measuring tape and perhaps a level. So first, remove your old drawer slides. You can do this by unscrewing the screws which keep them lodged. Do be mindful while doing this to not harm your drawer, or cabinet with it. Once the old ones are out, clean the area where you will place your new slides. You need to have a clear environment. Now, size up the spot where the new slides will go. HVPAL soft close drawer runners include instructions that demonstrate the right way to measure. Follow these steps closely. 

Then, you will add the new slides. Position the mounting legs on either side of the cabinet, and trace where the screws will be placed. Using the provided screws, drill pilot holes and screw in the brackets. Verify they are level as this is important for the slides to function properly. Now, fold out your soft close slides and screw them into place on your drawer. Again, follow the instructions closely. Slide the drawer back into the cabinet, and you’re done. When you open and close it you should notice a nice smooth action to it. And finally, give the soft close feature a try by giving the drawer a little nudge and releasing it. If it shuts softly, then you did a good job! 

Where to Get the Best Soft Close Drawer Slides For Retailers

Soft close drawer slides are everywhere, you will have no trouble finding these! HVPAL has an /excellent/ variety of these slides, and they can be obtained at many stores. You can look in your local hardware store or home improvement center. You can usually find a selection of soft close slides too. For those who like purchasing online visit HVPAL website or any reputable home site on home improvement. And read product descriptions and reviews to figure out which slides are right for you. 

When you’re shopping, consider the minus dimensions which are sized to fit your drawers. Soft close slides are available in a variety of sizes and weight capacities. Be sure to choose ones that fit snugly in your drawers. Also, do not neglect to see whether the slides are easy to install. Some have all the hardware needed to make things easier. And consider the material; a good set of slides are going to last longer and perform better as well. 

With your soft close slides in hand, you can get started. Putting them in can change the look of your drawers and, consequently, make your home feel that much more organized and modern. Appreciate your new soft close and smile, ’cause you did it yourself with a little help from HVPAL! 

How to Measure for Soft Close Drawer Slides that Fit Predominantly

If you want it to fit just right, measuring for drawer slides is incredibly important. That heavy piece of glass will fall out of your cabinet doors and shatter if you don’t measure it right, so those new soft close slides won't slide nicely. Remember to pull it out all the way so you can see the back. Once the drawer is out, get a tape measure. Determine the width of your drawer. This means you will have to measure from one side of the drawer to the opposite. Write down this number. And now, it’s time to measure depth. Front to back dimension Measurement taken from the front to the back of the drawer. This makes it clear for how long the slides should last. Write this number down too. 

Well now, you also have to measure the area inside the cabinet where the drawer will be. To finish, measure the height, width and depth of the pit opening. This can be helpful to determine whether your new soft close slides will slide nicely into the space. And be sure to measure the thickness of the drawer sides. Because some slides must be mounted on the side of the drawer, this is critical. If you don’t know how thick the sides of your drawers are, you may purchase the wrong slides. 

Finally, look to see if your cabinet has interior obstructions such as shelves or pipes. This could have an impact on how the slides fit. You may need to measure differently, if obstacles are in the way. After all everything measured, you can visit HVPAL company and choose the soft close drawer slides according to your measurements. And remember accurately measuring will save you a lot of frustration and time down the road! 

How to Professionally Replace Old Drawer Slides with Soft Close Like a Pro

New drawer slides may sound hard to install, but they are not especially when you have the choice of making them the soft close variety. First up, pull your drawer like we discussed prior. With the drawer pulled out, it’s time to remove those old slides. Try to word for screws that hold the slides in place. Unscrew these screws with a screwdriver. Do this carefully, to avoid the drawer or cabinet getting damaged. With all the screws removed, you can slide the old slides off. 

Now, you can order your new soft close slides from HVPAL! Before slipping them on, consult the leaflet that accompanies your slides. The steps for operating each type of slide might vary. Begin with attaching one side of the new slide to the outside edge of the drawer. Fix them in place using the screws that came with the slides. Ensure the slide is not tilted and is horizontal. Thanks the Drawer will slide easy. 

Now that you have secured the slides to the drawer, you can work on putting the other side in the cabinet. Insert the other half of the soft close slide with the hook into the track that’s located inside your cabinet. Push it back until you hear that click. Make sure everything is secure. Second, once both sides are hooked in place, slowly slide the drawer back into the cabinet. Open and close the drawer a couple of times to test how well it does. You should feel the soft close working giving you a nice and quiet close rather than slamming shut. If it ain’t broke, then look at the slides to see if they are installed correctly. 

What Are The Common Mistakes For Installing Soft Close Drawer Slides? 

There are sometimes errors or issues that can cause problems when installing soft close drawer slides. One of the most common errors is inadequate measurement. If you don’t measure the drawer and cabinet dimensions precisely, the new slides may not fit. Make sure to double-check your measurements before purchasing new slides. And then another mistake is not reading the instructions. All slide types, including HVPAL have their own set of installation instructions. Neglecting this step can result in a poor fit and may even damage slides. 

A second mistake is failing to ensure that the slides are level. The drawer won’t open or close easily, for example, if one side of the slide is higher than the other. Ensure both slides are straight and level before screwing anything in. Also not to forget if using the correct screws. Old screws from the old slides are occasionally used, but that can lead to headaches. Be sure to use the screws that accompany the new soft close slides and they will fit perfectly. 

Finally, some individuals fail to test the drawer once it is installed. This is an important step! Real the drawer multiple times to always open and shut just, simply for sure everything is effective in accordance. If you see any problem, inspect your installation and correct to your need. Hopfully you have avoid these common mistakes and enjoy your soft close drawer slides for years to come!