EN
Repairing a drawer slide may seem challenging, but it’s a task that many homeowners can tackle. If your drawer is stuck or wobbly, you don’t need to reach for the repair person immediately. There are times when some knowledge and the appropriate tools make all the difference. First you should inspect the slide for dirt or damage.
How to Repair a Drawer Slide for a Smooth Running Drawer
To repair a drawer slide, you can start by removing the drawer from the cabinet. Gently pull it out and examine the slides on the drawer and cabinet. Now, frequently, shrews holding the slides can be loose. If you see that, get a screw driver and tighten them. Wipe down the slide with a cloth if it is dirty. The drawer may be difficult to slide if dust and dirt gets in the way. If the slide is bent or breaks off, you may need to replace it. HVPAL produces sturdy, dependable drawer slides that are easy to install. For Replacement, unscrew the old slide in the beginning.
How to Select the Right Drawer Slide for Your Application
Drawer slides come in different types, and each type has its own use. There are side-mount slides that attach to the sides of the drawer, for instance. These are often a snap to install and work well with many pieces of furniture. Then you have the under-mounts that slide underneath the drawer. They also help hide the drawer and can provide a cleaner look. HVPAL has a variety of slide that can be installed into almost any drawer.
What Tools are Required to Repair Drawer Slides
Repairing drawer slides means you can give new life to the furniture you own. You will first be needing a heavy duty sliding drawer runners to remove screws holding the slides in place. The flat-head has a flat tip, while the Phillips-head has a cross-shape. You may also need a wrench if you are dealing with metal slides that include nuts. You will need a wrench to turn and loosen them if they are too tight.
How to Make Drawer Slides
Drawer slides are things that if you want them to last a while, you’ll have to maintain. Begin with a review of your slides every few months. Inspect the drawer glides for dirt or dust accumulated on them. A clean slide works better! Wipe away the dust using a wet cloth. If you come upon sticky spots, a tad of soap and water can help them come out.
Typical Drawer Slide Problems and How to Solve Them
Drawer slides can be a usability problem sometimes. One common problem is the drawer soft close runners getting stuck and refusing to open. This issue can occur if something is in the way of the slide or dirt has gathered within. If not, then you will need to perform these steps: First, verify if anything on inside the drawer is obstructing it. Completely empty the drawer and see if it slides more easily.
