How to measure cabinet drawer slides

If you decide to replace the cabinet drawer slides, you should know how to measure Cabinet Drawer Slides. If you are considering replacing or installing new drawer slides, measuring them in the correct way is crucial. This technique might sound tricky at first, but it’s really not that difficult. You can get the right measurements with a few simple tools and steps. HVPAL produces a well-fitting drawer slide and by providing accurate measurements, you will be able to make the correct choice for your cabinets. Now we are going to go over how to properly measure your cabinet drawer slides. 

Where to Get the Best Measurements for Cabinet Drawer Slides 

First you have to collect a few tools. Most valuable is a tape measure. Ensure it’s a flexible one, in order to be able to fit into tight places. You could also use a ruler if you have one available. Remove the drawer from your cabinet before measuring. This will help you get a better look at the slides. If the drawer is stuck, carefully drag it slowly out. Once the drawer is out, take a look at the slides. There are 2 slider rails on each side of the drawer. Now you have to figure out how long the slides should be. Measure from front to back on the slide. Definitely write the length down in inches or centimeters for memory’s sake. You might as well measure both slides, in case they are not the same. You will then also need to measure the depth of the edges of your slides. This is typically what fits into the cabinet. Measure from end to end of the slide. Remember that some of the slides may be of different widths, so double-check this as well. Lastly, take a look at how tall (in inches) the slides are. Things like height will also play a factor how well the slides fit in your cabinet as well. Clearly record all these measurements. Keeping them handy will help you find the perfect slides to shop for. And don’t forget, HVPAL comes in a wide range of sizes so you are sure to find the fit you need.  

What are Some Things to Consider when Measuring Drawer Slides for a Wholesale Purchase? 

If you’re ordering drawer slides in large quantities for a big project, or to outfit a lot of cabinets at one time it’s even more critical that your measurements are correct. The first thing to understand is that there are multiple types of slides. Some are mounted on the sides; others under-mount. That will make you rethink what it is that you measure. The width and height are crucial with side-mounted slides. If you’re not sure, look for the specs of the slides that interest you at HVPAL. It is also worth checking the thickness of the drawer itself. This can change the kind of slide you require. It also saves time later, because then you have all of the measurements written nice and neat down. This makes it simple to share them with suppliers or contractors. One other tip is to order a few more slides. There are times when things do not go as planned during the installation or a slide doesn't fit like you thought it would. It’s good to have a few spares to avoid delays. If you are working with a professional, they might have their tools and techniques of measuring. This is always nice way to talk about it, and to make sure measurements are understood correctly3 Render4 Mix the cement well. For wholesale orders, you might also want to inquire about warranty or return policies. This will give you the confidence in knowing that your purchase is right for you! Resolution HVPAL stands by their products, to guarantee quality and your satisfaction. 

What You Need to Measure Your Drawer Slides Tools

There are several simple tools necessary to measure drawer slides effectively. To start off with you’ll need a tape measure. A tape measure is a long, flexible device that can bend around corners and snake into tight spaces. It often has inch and centimeter markings on it. Cheap and cheerful but you will be able to cut them to whatever length you require. If you want, then, the next thing you might need is a pencil and paper. The pencil will allow you to write down your measurements so you don’t have to remember them. With paper, your notes are organized. You might also want to use a level. A level is a little gadget that you can use to check if something is straight. When you calculate your drawer slide lengths, it’s critical that they be level so the drawers open and close with ease. Lastly, having a helper at home can be helpful too! It can help to have someone hold the tape measure while you read off the numbers sometimes. Just remember that patience and precision with these tools will ensure you have the right measurements for your cabinet drawer slides. 

How To Consult The Experts On Measuring Cabinet Drawer Slides

Receiving professional guidance can also make you feel more secure in the process of measuring cabinet drawer slides. One logical place to start is at your local hardware store. Lots of stores have helpful employees with great information about home improvement. You can ask them questions on how to measure drawer slides and they may even demonstrate it for you! You can also go to the site of HVPAL. We have some useful guides and tips on our site that detail how to measure drawer slides properly. There are videos and articles out there that break down for you how to do it. If you like learning from others, join forums or social media groups about do-it-yourself home improvement. There’s a lot of advice and personal experience shared in these groups, but they are also there to answer any questions you have. Last but not least, you can also check books out from your library that speak about cabinet making and heavy duty sliding drawer. With these books, there are usually good directions as well as some pictures that clarify. With all these references, you will not be a novice at how to measure drawer slides anymore. 

How to Measure Drawer Slides for Cabinets Without Making Mistake

It can be tricky to measure drawer slides for cabinets, but you don’t have to make mistakes. First, always double-check your measurements. If you measure once and then write it down, it’s a good practice to measure a second time to ensure that the figures match. There are times when our eyes deceive us and it’s simple to get the wrong read from a tape measure. Then, be careful about the location from where you start measuring. Just be sure to measure from the right spot, typically the back of the drawer to the front. And if you begin in the wrong place, your slides will be too big. It’s also good to consider what kind of slides you want to use. Slides are available in various lengths, so having that information will help you measure correctly. Also, make sure you are measuring an empty drawer when taking measurements. If there are contents inside, they may be difficult to measure correctly. Finally, take your time! Chewing can make you prone to errors, so slow down and do it right. Do not make these mistakes! 4 tips you need to know, to avoid long-term damage that may occur when cabinet drawer slides won’t fit properly.